Atlas EZO-HUM™ Embedded Humidity Probe – Stainless Steel Body | EZO-HUM-P-S

Description:

From industrial processes to environmental monitoring, this humidity probe can be used in countless applications. Our stainless steel Humidity Probe is versatile and durable; Ideal for both indoor and outdoor humidity monitoring. The EZO Embedded Humidity Probe gives the same readings as our EZO-HUM Circuit. There is no difference in the readings or accuracy, only the design.

This probe comes fully calibrated and ready to use right out of the box.

Specifications:

• Reads: Relative humidity (RH), Dew point, Air temperature

• Range: 0 – 100% RH

• Calibration: Factory calibrated

• Response time:

  • 1 reading per second (UART mode)

  • 1 reading per 300 milliseconds (I2C mode)

• Accuracy: +/- 2% of reading from 5-95% RH

• Body material: 316 stainless steel

• Connector: 5 lead data cable

• Cable length: 1 meter

• Data protocol: UART & I2C

• Default I2C address: 111 (0x6F)

• Data format: ASCII

• Operating voltage: 3.3V − 5V

• IP rating: IP67 (waterproof up to 1 meter)

• NEMA rating: 6P

• Life expectancy: 10 years

Documents & Downloads:

• EZO-HUM™ Stainless Steel Body Probe Datasheet

• Female connector information

• FREE Software - AtlasDesktop Monitoring Software

• AtlasDesktop Monitoring Software Users Guide

• Arduino Uno Sample Code

• Arduino Mega / Giga Sample Code

• Arduino I2C Sample Code

• Raspberry Pi Sample Code (I2C)

• EZO UART Library

• EZO I2C Library

• EZO-HUM™ 3D model (*step)

Part List:

• 1x Embedded Humidity probe with stainless steel body

• 1x data cable with 5 pin male header

• 1x Locknut & O-ring.