top of page

Cytron 13 Amp 6V-30V DC Motor Driver

Price

₱950.00

Description:

MD13S is designed to drive high current brushed DC motors up to 13A continuously. It offers several enhancements, such as support for both locked-antiphase and sign-magnitude PWM signal, because it uses full solid state components which are able to provide faster response time and eliminate the wear and tear of the mechanical relay.

MD13S has great improvement in current protection which MD10C does not have. With new circuit and design, the MD13S is able to limit and support current up to 30A max(10 seconds). And the continuous current is at 13A without a heatsink (at room temperature of 25°C).
MD13S has great improvement in current protection which MD10C does not have. With new circuit and design, the MD13S is able to limit and support current up to 30A max(10 seconds). And the continuous current is at 13A without a heatsink (at room temperature of 25°C).

 

Features:

Bi-directional control for 1 brushed DC motorSupport motor voltage from  6V to 30VDCMaximum current up to 13A continuous and 30A peak (10 seconds)GROVE compatible3.3V and 5V logic level input.Solid state components provide faster response time and eliminate the wear and tear of mechanical relayFully NMOS H-Bridge for better efficiency and no heat sink is requiredRegenerative BrakingSpeed control PWM frequency up to 20KHz (Actual output frequency is same as input frequency)Support both locked-antiphase and sign-magnitude PWM operation, *NOT RC (Radio Control) PWMSMD compatibleRoHS, FCC and CE complianceDimension: 61mm x 33mm

 

Specifications:

Power Input Voltage: 6-30VIMAX (Maximum Continuous Motor Current): 13AIPEAK – (Peak Motor Current) : 30AVIOH (Logic Input – High Level): 3-5.5VVIOL (Logic Input – Low Level): 0.5VMaximum PWM Frequency *: 20KHz

Must not exceed 10 seconds.* Actual output frequency is the same as input frequency.*** Tested at room temperature.

 

Packing List:

  • 1 x MD13S motor driver board

  • 1 x Green + Black 2-way terminal blocks (Non-soldered

  • Note: The terminal block, normally Black is for Motor, and Green is for Power

  •  1 x Grove connector (Grove to Grove)

 

Resources:


Quantity

bottom of page