top of page

ESP32 Arduino LVGL WiFi Bluetooth TouchScreen - 2.8" Resistive | 3.5" Capacitive

Price

₱1,090.00

Product details of ESP32 Arduino LVGL WiFi Bluetooth TouchScreen - 2.8" Resistive | 3.5" Capacitive and Resistive

ESP32 Arduino LVGL Wifi Bluetooth 2.8 Inch TouchScreen 240x320 Resistive is based on ESP32D0WDQ6(WROOM), the display resolution is 320*240, and is resistive touch.

ESP32 2.8" 240*320:

Core controller: ESP32 WROOM

Resolution: 320*240 TFT

Resistive Touch

Dimension: 2.8 inch Onboard

RGB LED: Onboard Photosensitive resistor(for auto Backlight adjustment) Extended IO for applications' usage

Speaker connector

ESP32 Arduino LVGL Wifi Bluetooth 3.5 Inch TouchScreen 320x480

Parameter

  • Use low-power dual-core 32-bit CPU, which can be used as an application processor.

  • The main frequency is up to 240MHz, and the computing power is up to 600 DMIPS Built-in 520 KB SRAM

  • Support UART/SPI/I2C/PWM/ADC/DAC and other interfaces

  • Support OV2640 and OV7670 cameras, built-in flash

  • Support picture Wi-Fi upload

  • Support TF card

  • Support multiple sleep modes.

  • Embedded Lwip and FreeRTOS

  • Support STA/AP/STA+AP working mode.

  • Support Smart Config/AirKiss one-click network configuration.

  • Support secondary development.

Specifications:

  • Working voltage 4.75-5.25V

  • SPIFlash default 32Mbit

  • RAM internal 520KB

  • Wi-Fi 802.11b/g/n/e/i

  • Bluetooth Bluetooth 4.2BR/EDR and BLE standard

  • Support interface (2Mbps) UART, SPI, I2C, PWM

  • Support TF card, maximum support 4G IO port 9 Serial port rate default 115200bps Spectrum range 2400 ~2483.5MHz

  • Antenna form Onboard PCB antenna, gain 2dBi

  • Image output format: JPEG (only OV2640 support), BMP, GRAYSCALE

  • Packaging method DIP-16

  • Transmit power 802.11b: 17±2dBm (@11Mbps)

  • 802.11g: 14±2dBm (@54Mbps)

  • 802.11n: 13±2dBm (@MCS7)

  • Receiving sensitivity

  • CCK, 1Mbps: -90dBm CCK, 11Mbps: -85dBm

  • 6Mbps(1/2BPSK): -88dBm

  • 54Mbps (3/464-QAM): -70dBmMCS7 (65Mbps, 72.2Mbps): -67dBm

Power consumption

  • Turn off the flash: 180mA@5V

  • Turn on the flash and adjust the brightness to the maximum: 310mA@5V

  • Deep-sleep: The lowest power consumption can reach 6mA@5V

  • Modern-sleep: the lowest can reach 20mA@5V

  • Light-sleep: the lowest can reach 6.7mA@5V

  • Security WPA/WPA2/WPA2-Enterprise/WPS

  • Working temperature -20 ℃ ~ 70 ℃

  • Storage environment -40 ℃~ 125 ℃, <90%RH

Application:

  • Home smart device image transmission

  • Wireless monitoring

  • Smart agriculture

  • QR wireless recognition

  • Wireless positioning system signal

  • And other IoT applications

  • Resistive Touch Screens comes with a stylus.

Type

Quantity

bottom of page